How to Install GPS Tracker on Motorcycle

how to install gps tracker on motorcycle

For sure, owning a motorcycle is fun, but it is also a responsibility to take care of it and protect it from thieves properly. As a motorcycle owner, you must create an anti-theft system to protect the motorcycle from criminals. Installing a GPS tracker is your second line of defense against theft apart from the motorcycle lock.

But how to install GPS tracker on motorcycle? Installing a GPS varies from brand to brand, but this article will provide the general steps that will be used to serve as a guide. The most important thing is to read and understand the instructions before proceeding with the installation process. Please check on our step-by-step guide below:

Step 1: Choosing the Brand

The initial step in learning how to attach GPS to motorcycle is identifying the brand of your tracking device. The reason is that the installation process will all depend on the product type you have chosen.

As mentioned earlier, it is essential to read the installation procedure carefully and follow it to the letter when installing a GPS device. The manufacturer knows exactly what to do when it comes to the installation procedure.

In choosing the brand, it is highly recommended to choose a weatherproof GPS designed for heavy vibration. Another important factor to consider is the presence of lithium-ion batteries that will last for days before it is disconnected.

Step 2: Make an Installation Plan

Before starting the installation process, you must formulate an overall plan. Specifically, we will install the GPS device on the tail end of the motorcycle. The plan is to route the wire through the plastic to the battery to allow a connection for power, ignition, and the ground.

Step 3: Removing the Motorcycle Seat

The next step is to remove the motorcycle seat for you to get access to the motorcycle’s battery. If the seat is secure with screws, you can remove them using the proper screwdriver. Once the screw is removed, you can pull and remove the seat to access the battery. Then, you will also remove the tail seat to expose the side of the tail section where the GPS will be installed.

Step 4: Routing the Wirings

Once everything is accessible, the next step is to route the wirings of the GPS to the motorcycle’s battery to gain access to the power ignition. Make sure to make the wiring go through the plastics and reach the battery.

Once the wirings pull through, there are several connection types that you can use to connect it with the battery. You can use blade connectors, scotch locks, or group the wires together. When using scotch locks, make sure it’s double-bladed scotch locks.

Step 5: Connect and Secure the GPS Device

connect and secure the gps device

The next step is connecting the tracker to the batter using the wirings while connecting to the ignition switch. After that, securing the GPS unit in the motorcycle’s tail section is essential. But remember that there are also other places where you can install this GPS device, but it also requires different configurations upon installation.

Securing the device wherever you install it is crucial because the device is gathering data while it is in use. You need to find a way to make its position stable and secure. You can zip-tied it or use the mounting screws of the device if it is available. It will help in keeping accurate information from displaying.

Step 6: Perform a Function Test

The final step is to perform a function test to confirm that the GPS tracker is working properly. Move the motorcycle outside and turn it on to make sure that the GPS device has the light displayed in the unit. Take it for a ride for 1 or 2 miles, followed by checking the data provided by the GPS.

Where to Put GPS Tracker on Motorcycle

where to put gps tracker on motorcycle

The most important thing to remember when learning how to put GPS on motorcycle is to know where to install it on the bike. Yes, knowing where to hide GPS on motorcycle is extremely important so that it cannot be easily located and identified by the thief.

If the motorcycle thief is not aware of the exact location of the GPS tracker, it will allow you to find the precise location of your motorcycle. You can access the location through the GPS app, which can be used when reporting to the police.

So, where is the best place to put the GPS tracker on your motorcycle? We all know the limited space availability of a motorcycle. So, the choices of where to put the GPS tracker are limited in terms of the safest location that is unrecognizable by theft.

There are specific locations on your bike that are best suited for GPS tracker installation. The first one is the handlebar stems. The other highly recommended place is the seat post or the frame. You can also put it at the tail end of your motorcycle.

The most important factor to consider in looking for the place of installation is your ability to hide the GPS tracker and make it unrecognizable. You can even disguise the device as a reflector or a bike light to make it more unrecognizable.

Conclusion

A GPS tracker installed on your motorcycle is a part of your defense from theft. So, learning how to install a GPS tracker on a motorcycle is an essential skill. It is easy to understand as long as you are interested in doing it, or you can also ask professional bike mechanics to do it. The most important thing is to have your bike protected from criminals.

5/5 - (4 votes)

Leave a Comment