p code gps receiver - Maxor

Maxor integrates one of the Euro-GD or Euro-GG boards with one of the communications boards (GSM dual-band, dual-user cellular phone; Spread Spectrum 915 MHz; UHF radio) and a GG or GD antenna (optional). It is packaged in a compact, rugged, metal box (15.9 x 4.9 x 17.2 cm) that includes generous capacity rechargeable Li-Ion batteries (for up to 25 hours of continuous work), and internal charger which charges the batteries with any input from 9 to 28 volts d.c. With its MinPad you don’t need an external controller for most tasks. Maxor in the KuKu mode (optional) can be programmed to turn on periodically, establish communication, transmit their position and then go back into sleep mode. It may have up to four RS-232 serial ports and wireless Bluetooth® interface. Maxor GPS Receiver $3950

* Not available through Mighty GPS to US based customers.  Various options and prices are available. Contact us for more info.

Serial Connector Pinout

(at the receiver)	SIGNAL NAME	NUMBER	DIR	DESCRIPTION
	Power Output	1	O	External Power Output (I<0.2A in all ports)
	GND	2	I/O	Signal Ground
	CTS	3	I	Clear to Send
	RTS	4	O	Request to Send
	RXD	5	I	Receive Data
	TXD	6	O	Transmit Data
		7		NC

Connector type is SEALED RECEPTACLE, ODU G80F1C-T07QC00-0000

Power Connector Pinout

(at the receiver)	SIGNAL NAME	NUMBER	DIR	DESCRIPTION
	Power Input	1	P	+6V to +28V to PGND
	Power Input	2	P	+6V to +28V to PGND
	Power GND	3	P	Power Ground
	Power GND	4	P	Power Ground
		5

Connector type is SEALED RECEPTACLE, 5 pin ODU G80F1C-T05QF00-0000

GPS/GLONASS External Antenna RF connector

Connector type is Applied Engineering Product (AEP) 6001-7051-003

Note: Specifications are subject to change without notice.