p-code gps receiver - Maxor-GGDT

Maxor-GGDT integrates the GGD-112T board with one of the communications boards (GSM dual-band, dual-user cellular phone; Spread Spectrum 915 MHz; UHF radio) and a GPS/GLONASS antenna (optional). It is packaged in a compact, rugged, metal box (159 x 115 x 172 mm) that includes generous capacity rechargeable Li-Ion batteries (for up to 15 hours of continuous work), and internal charger which charges the batteries with any input from 6 to 28 volts d.c. With its MinPad you don't need an external controller for most tasks. It may have up to four RS-232 serial ports, USB 1.1 interface and wireless Bluetooth® interface.

For pricing and further information, please contact us at

* Not available through Mighty GPS to US based customers.  Various options and prices are available. Contact us for more info.

Serial Connector Pinout

(at the receiver)

SIGNAL NAME NUMBER DIR DESCRIPTION
Power Output

1

O External Power Output (I<0.2A in all ports)
GND

2

I/O

Signal Ground
CTS

3

I

Clear to Send
RTS

4

O

Request to Send
RXD

5

I

Receive Data
TXD

6

O

Transmit Data
 

7

  NC

Connector type is SEALED RECEPTACLE, 7 pin ODU G80F1C-T07QC00-0000

Power Connector Pinout

(at the receiver)

SIGNAL NAME NUMBER DIR DESCRIPTION
Power Input

1

P

+6V to +28V to PGND
Power Input

2

P

+6V to +28V to PGND
Power GND

3

P

Power Ground
Power GND

4

P

Power Ground
 

5

   

Connector type is SEALED RECEPTACLE, 5 pin ODU G80F1C-T05QF00-0000

GPS/GLONASS External Antenna RF connector

SIGNAL NAME NUMBER DIR DESCRIPTION
ANT_IN

TNC

I

RF input from LNA, 60 mA @ 5.0 Volts

Connector type is Applied Engineering Product (AEP) 6001-7051-003

Note: Specifications are subject to change without notice.